Filter
Top Products
62-16
Software Configuration Guide—Release 15.0(2)SG
OL-23818-01
Chapter 62 Performing Diagnostics
POST on the Active Supervisor Engine
The active supervisor engine tests the remote redundant 10-Gigabit ports on the standby supervisor
engine if it is present when the active supervisor engine is booting. The status of the port is displayed as
“Remote TenGigabit Port Status.” If no standby supervisor engine is present, the remote port status is
always displayed as Untested. This situation persists even after a new standby supervisor engine is
inserted. The remaining tests are conducted using only the Gigabit ports’ configuration.
After the active supervisor engine has completed the bootup diagnostics, if the standby supervisor engine
is now removed, the remote port status is changed to Untested in the overall diagnostic results.
POST Results on an Active Supervisor Engine Example
Switch# show diagnostic result module 1 detail
module 1:
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________________
1) supervisor-bootup -----------------------> .
Error code --------------------------> 0 (DIAG_SUCCESS)
Total run count ---------------------> 1
Last test execution time ------------> Jul 19 2005 13:28:16
First test failure time -------------> n/a
Last test failure time --------------> n/a
Last test pass time -----------------> Jul 19 2005 13:28:16
Total failure count -----------------> 0
Consecutive failure count -----------> 0
Power-On-Self-Test Results for ACTIVE Supervisor
Power-on-self-test for Module 1: WS-X4516-10GE
Port/Test Status: (. = Pass, F = Fail, U = Untested)
Reset Reason: Software/User
Cpu Subsystem Tests ...
seeprom: . temperature_sensor: . eobc: .
Port Traffic: L3 Serdes Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: .
36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: .
Local 10GE Port 62: .
Local 10GE Port 63: .