Filter
Top Products
Index
IN-32
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL-23818-01
overview 21-2
routed packets
ACLs
47-34
route-map (IP) command 35-6
route maps
defining
35-6
PBR 35-2
router ACLs
description
47-3
using with VLAN maps 47-32
router ACLs, using PACL with VLAN maps 47-41
route targets
VPN
36-3
Routing Information Protocol
See RIP
RPF
<Emphasis>See Unicast RPF
RSPAN
configuration guidelines
51-16
destination ports 51-5
IDS 51-2
monitored ports 51-4
monitoring ports 51-5
received traffic 51-3
sessions
creating
51-17
defined 51-3
limiting source traffic to specific VLANs 51-23
monitoring VLANs 51-22
removing source (monitored) ports 51-21
specifying monitored ports 51-17
source ports 51-4
transmitted traffic 51-4
VLAN-based 51-5
RSTP
compatibility
18-23
description 18-22
port roles 18-24
port states 18-24
S
SAID
See 802.10 SAID
scheduling
37-14
defined 37-5
overview 37-6
scheduling, IP SLAs operations 60-6
secondary edge port, REP 20-4
secondary root switch 18-12
secondary VLANs 39-2
associating with primary 39-16
permitting routing 39-23
security
configuring
44-1
Security Association Identifier
See 802.10 SAID
selecting a power management mode
10-8
selecting X2/TwinGig Convertor Mode 6-14
sequence numbers in log messages 52-7
server IDs
description
59-23
service policy, configure class-level queue-limit 37-82
service-policy command 37-29
service-policy input command 29-2, 37-35
service-provider networks
and customer VLANs
25-2
set default interface command 35-7
set interface command 35-7
set ip default next-hop command 35-7
set ip next-hop command 35-6
set-request operation 54-4
severity levels, defining in system messages 52-8
shaping, QoS on Sup 6-E 37-76
sharing(bandwidth), QoS on Sup 6-E 37-78
Shell functions
See Auto SmartPorts macros
See Auto Smartports macros
Shell triggers