Filter
Top Products
17-4
Software Configuration Guide—Release 15.0(2)SG
OL-23818-01
Chapter 17 Configuring Auto SmartPort Macros
Configuring Auto SmartPorts
Table 17-2 shows the Auto SmartPorts built-in macros that are embedded in the switch software.
Note By default, the built-in event triggers are mapped to the built-in macros.
Auto SmartPorts Configuration Guidelines
Auto SmartPort guidelines include the following:
• To avoid system conflicts when Auto SmartPorts macros are applied, remove all port configuration
except for 802.1X authentication.
CISCO_WIRELESS_AP_EVENT System detects that a wireless application is connected to an
interface.
CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT System detects that a wireless lightweight application is connected
to an interface.
CISCO_DMP_EVENT System detects that a digital media player is connected to an
interface.
CISCO_IPVSC_EVENT System detects that an IP video surveillance camera is connected
to an interface.
Table 17-1 Auto SmartPorts Built-in Event Trigger Macros (continued)
Event Trigger Name Description
Table 17-2 Auto SmartPorts Built-in Macros
Macro Name Description
CISCO_PHONE_AUTO_
SMARTPORT
Use this macro for Cisco IP phone device. It enables QoS, port security,
Address Resolution Protocol (ARP) inspection (dynamic ARP inspection),
IP source guard, DHCP snooping, storm control and spanning tree
protection on the port.
CISCO_SWITCH_AUTO_
SMARTPORT
Use this macro to apply the switch macro for Cisco switches. It enables
trunking on the port.
CISCO_ROUTER_AUTO_
SMARTPORT
Use this macro to apply the router macro for Cisco routers. It enables QoS,
trunking, and spanning-tree protection on the port.
CISCO_AP_AUTO_
SMARTPORT
Use this macro to apply the wireless access point (AP) macro for Cisco
APs. It enables support for an autonomous wireless access point and QoS
on the port.
CISCO_LWAP_AUTO_
SMARTPORT
Use this macro to apply the lightweight wireless access point macro for
Cisco lightweight wireless APs. It enables QoS, port security, dynamic
ARP inspection, IP source guard, DHCP snooping, storm control, and
spanning tree protection on the port.
CISCO_IP_CAMERA_AUTO_SMARTPORT Use this macro for a Cisco IP surveillance camera device. It enables QoS,
port security, and access VLAN on the port.
CISCO_DMP_AUTOSMARTPORT Use this macro for a Cisco digital media player device. It enables QoS, port
security, and access VLAN on the port.