Filter
Top Products
2-18
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
OL-17309-02
Chapter 2 Preparing the Cisco uBR7225VXR Router for Installation
Component Checklists
Component Checklists
• Check off the equipment as it is unpacked.
• Titles and quantities of documents will vary.
Table 2-3 provides the list to verify the contents of the shipping container for the Cisco uBR7225VXR
router.
Gatekeeper and gateway equipment installed and configured.
Dial plan based on the supported VoIP protocol used—H.323 or SGCP.
Table 2-2 Site Preparation Checklist (continued)
Task Verified By Date
Table 2-3 Cisco uBR7225VXR Router Component List
Description Received
• Cisco uBR7225VXR chassis
• Network processing engine
• Up to two AC-input power supplies and power cords (blank power supply filler plate should be
installed in empty power supply slot)
• Up to two cable interface line cards (blank cable interface line cards should be installed in empty
cable interface line card slots)
• CompactFlash Disk
The following accessories might arrive in separate shipping containers:
• Rack-mount and cable-management kit—Two rack-mount brackets, cable-management bracket,
eight M4 x 6-mm Phillips flathead screws, four M3 x 6-mm Phillips panhead screws, and four
10/32 x 3/8-inch slotted binderhead screws
• AC-input power cables—Up to two AC-input power cables (if separate AC-input power supply
ordered)
• Documentation, including the following:
–
Cisco Information Packet
–
Cisco Network Registrar documentation—if ordered
–
Cisco IOS software documentation set—if ordered
Note All hardware and software documentation is also found at the following URL:
http://www.cisco.com/en/US/products/hw/cable/ps2217/tsd_products_support_series_home.ht
ml