Dell 3424P Computer Accessories User Manual


 
Configuring System Information 107
The following is an example of the CLI commands:
Managing Stack Members
The
Stack Management
page
allows network managers to either reset the entire stack or a specific
device. To open the
Stack Management
page, click
System
General
Stack Management
in the
tree view.
Figure 6-7. Stack Management
NOTE: Save all changes to the Running Configuration file before resetting the device. This prevents the
current device configuration from being lost. For more information about saving Configuration files, see
Managing Files.
Unit No. on Top
— First stack member number. Possible values are Master and 1-6.
Unit No. on Bottom
— Second stack member number. Possible values are Master and 1-6.
Switch Stack Control from Unit 1 to Unit 2
— Enables switching from the current stack Master to
the backup Master unit.
NOTE: Resetting the Master Unit resets the entire stack.
console> show version
SW version 1.0.0.0 (date 23-Jan-2005 time 17:34:19)
Boot version 1.0.0.0 (date 11-Jan-2005 time 11:48:21)
HW version 1.0.0