Filter
Top Products
Configuring Switch Information 261
• Only one destination port can be defined.
The following restrictions apply to ports configured to be source ports:
• Source Ports cannot be a LAG member.
• Ports cannot be configured as a destination port.
• Up to 8 source ports are supported.
To open the
Port Mirroring
page, click
Switch
→
Ports
→
Port Mirroring
in the tree view.
NOTE: When a port is set to be a target port for a port-mirroring session, all normal operations on it
are suspended. This includes Spanning Tree and LACP.
Figure 7-18. Port Mirroring
The
Port Mirroring
page contains the following fields:
Destination Port
— The port number to which port traffic is copied.
Transmit Packets
— Defines the how the packets are mirrored. The possible field values are:
Untagged
— Mirrors packets as untagged vlan packets. This is the default value.
Tagged
— Mirrors packets as tagged vlan packets.
Ty p e
— Indicates if the mirrored packets are RX, TX, or both RX and TX.
Status
— Indicates if the port is currently monitored (
Active
) or not monitored (
Ready
).
Remove
— When selected, removes the port mirroring session.