Filter
Top Products
Configuring System Information 151
Configuring ARP Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
ARP Settings
page.
The following is an example of the CLI commands:
Table 6-36. ARP Settings CLI Commands
CLI Command Description
arp
ip_addr
hw_addr
{
ethernet
interface-number
|
vlan
vlan-id
|
port-channel
number
}
Adds a permanent entry in the ARP cache.
arp timeout
seconds
Configures how long an entry remains in the ARP
cache.
clear arp-cache
Deletes all dynamic entries from the ARP cache
show arp
Displays entries in the ARP Table.
no arp
Removes an ARP entry from the ARP Table.
console(config)# arp 198.133.219.232 00-00-0c-40-0f-bc
console(config)# arp timeout 12000
console(config)# exit
console# show arp
ARP timeout: 12000 Seconds
Interface IP address HW address Status
--------- ---------- ---------- ------
1/e11 10.7.1.102 00:10:B5:04:DB:4B Dynamic
1/e12 10.7.1.135 00:50:22:00:2A:A4 Static