Filter
Top Products
312 Configuring Switch Information
www.dell.com | support.dell.com
Configuring GVRP Parameters
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of
VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to
automatically learn VLANs to bridge ports mapping, without having to individually configure each
bridge and register VLAN membership.
The
GVRP Parameters
page enables GVRP globally. GVRP can also be enabled on a per-interface
basis. To open the
GVRP Parameters
page, click
Switch
→
VLAN
→
GVRP Parameters
in the tree
view.
Figure 7-34. GVRP Parameters
The GVRP Parameters page contains the following fields:
GVRP Global Status
— Enables or disables GVRP on the device. GVRP is disabled by default.
Interface
— Specifies port or LAG for editing GVRP settings.
GVRP State
— Enables or disables GVRP on an interface.
Dynamic VLAN Creation
— Enables or disables VLAN creation through GVRP on an interface.
GVRP Registration
— Enables or disables VLAN registration through GVRP on an interface.