Filter
Top Products
98 Configuring System Information
www.dell.com | support.dell.com
For example:
Table 6-13. Clock Setting CLI Commands
The following is an example of the CLI commands:
Viewing System Health Information
The
System Health
page
displays
physical device information, including information about the device’s
power and ventilation sources. To open the
System Health
page, click
System
→
General
→
Health
in
the tree view.
console(config)# clock summer-time recurring usa
console(config)# clock time zone 2 zone TMZ2
console(config)# clock set 10:00:00 apr 15 2004
CLI Description
clock source
sntp
Configures an external time source for the system clock.
clock time zone
hours-offset
[
minutes
minutes-offset
][
zone
acronym
]
Sets the time zone for display purposes.
clock summer-time
Configures the system to automatically switch to summer
time (Daylight Savings Time).
clock summer-time recurring
{
usa
|
eu
|
week day month
hh:mm week day month
hh:mm
}
[
offset
offset
] [
zone
acronym
]
Configures the system to automatically switch to summer
time (according to the USA and European standards).
clock summer-time date
date
month year hh:mm date month
year hh:mm
[offset
offset
]
[zone
acronym
]
Configures the system to automatically switch to summer
time (Daylight Savings Time) for a specific period -
date/month/year format.
console(config)# clock timezone -6 zone CST
console(config)# clock summer-time recurring first sun apr 2:00
last sun oct 2:00
console(config)# clock source sntp
console(config)# interface ethernet e14
console(config-if)# sntp client enable
console(config-if)# exit
console(config)# sntp broadcast client enable