Dell 3424P Computer Accessories User Manual


 
182 Configuring System Information
www.dell.com | support.dell.com
The TACACS+ default parameters are user-defined defaults. The default settings are applied to
newly defined TACACS+ servers. If default values are not defined, the system defaults are applied
to the new TACACS+ servers.
The following are the TACACS+ defaults:
Source IP Address
— The default device source IP address used for the TACACS+ session
between the device and the TACACS+ server. The default source IP address is 0.0.0.0.
Key String (0-128 Characters)
— The default key string used for authenticating and encrypting all
communications between the device and the TACACS+ server. This key is encrypted.
Timeout for Reply (1-30)
— The default time that passes before the device and the TACACS+
server connection times out. The default is 5 seconds.
Adding a TACACS+ Server
1
Open the
TACACS+ Settings
page.
2
Click
Add.
The
Add TACACS+ Host
page opens:
Figure 6-52. Add TACACS+ Host
3
Define the fields.
4
Click
Apply Changes
.
The TACACS+ server is added, and the device is updated.
Displaying the TACACS+ Table
1
Open the
TACACS+ Settings
page.
2
Click
Show All
.
The
TACACS+ Table
opens: