Filter
Top Products
Configuring Switch Information 307
Defining VLAN LAGs Settings
The
VLAN LAG Settings
page provides parameters for managing LAGs that are part of a VLAN.
VLANs can either be composed of individual ports or of LAGs. Untagged packets entering the
device are tagged with the LAGs ID specified by the PVID. To open the
VLAN LAG Settings
page,
click
Switch
→
VLAN
→
LAG Settings
in the tree view.
Figure 7-32. VLAN LAG Settings
The
VLAN LAG Settings
page contains the following fields:
LAG
— The LAG number included in the VLAN.
LAG VLAN Mode
— The LAG VLAN mode. Possible values are:
General
— The LAG belongs to VLANs, and each VLAN is user-defined as tagged or
untagged (full 802.1Q mode).
Access
— The LAG belongs to a single, untagged VLAN.
Trunk
— The LAG belongs to VLANs in which all ports are tagged (except for one port that
can be untagged).
PV
E
Promiscuous
— The LAG belongs to a PVE Promiscuous VLAN.
PV
E
Community
— The LAG belongs to a PVE Community VLAN.
PV
E
Isolated
— The LAG belongs to a PVE Isolated VLAN.
Dynamic
— Assigns a LAG to a VLAN based on the host source MAC address connected to
the LAG.