Dell 3424P Computer Accessories User Manual


 
Configuring System Information 185
Figure 6-54. RADIUS Settings
The
RADIUS Settings
page contains the following pages:
IP Address
— The list of Authentication Server IP addresses.
Priority (0-65535)
— The server priority. The possible values are 0-65535, where 0 is the highest
value. This is used to configure the order in which servers are queried.
Authentication Port
— Identifies the authentication port. The authentication port is used to verify
the RADIUS server authentication.
Number of Retries (1-10)
— Indicates the number of transmitted requests sent to RADIUS server
before a failure occurs. The possible field values are 1-10.
Timeout for Reply (1-30
) — Indicates the amount of the time in seconds the device waits for an
answer from the RADIUS server before retrying the query, or switching to the next server.
The possible field values are 1- 30.
Dead Time (0-2000)
— Indicates the amount of time (in minutes) that a RADIUS server is
bypassed for service requests. The range is 0-2000.
Key String (1-128 Characters)
— The Key string used for authenticating and encrypting all
RADIUS communications between the device and the RADIUS server. This key is encrypted.
Source IP Address
— Indicates the source IP address that is used for communication with
RADIUS servers.
Usage Type
Indicates the server usage type. Can be one of the following values: login, 802.1x
or all. If unspecified, defaults to all.