Filter
Top Products
86 Using Dell OpenManage Switch Administrator
www.dell.com | support.dell.com
Global Configuration Mode
Global Configuration commands apply to system features, rather than a specific protocol or
interface.
To access Global Configuration mode, at the Privileged EXEC Mode prompt, type the
configure
command
and press <Enter>. The Global Configuration mode displays as the device host name
followed by (config) and the pound sign #.
console(config)#
To list the Global Configuration commands, enter a question mark at the command prompt.
To return from Global Configuration mode to Privileged EXEC mode, type the
exit
command or
use the <Ctrl>+<Z> key combination.
The following example illustrates how to access Global Configuration mode and return back to the
Privileged EXEC mode:
console#
console# configure
console(config)# exit
console#
For a complete list of the CLI modes, see the
Dell™ PowerConnect™3424/P and PowerConnect
3448/P CLI Guide
.