Filter
Top Products
Configuring Quality of Service 381
The
DSCP to Queue
page contains the following fields:
DSCP In
— The values of the DSCP field within the incoming packet.
Queue
— The queue to which packets with the specific DSCP value is assigned. The values are 1-
4, where 1 is the lowest value and 4 is the highest.
Mapping a DSCP Value and Assigning a Priority Queue
1
Open the
DSCP to Queue
page.
2
Select a value in the
DSCP In
column.
3
Define the
Queue
field.
4
Click
Apply Changes
.
The DSCP is overwritten, and the value is assigned an egress queue.
Assigning DSCP Values Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
DSCP
to Queue
page.
The following is an example of the CLI commands:
Table 9-112. DSCP Value to Queue CLI Commands
CLI Command Description
qos map dscp-queue dscp-list
to queue-id
Modifies the DSCP to queue mapping.
console(config)# qos map dscp-queue 33 40 41 to 1