Filter
Top Products
Configuring System Information 191
Enabling SNMP Notifications
1
Open the
SNMP Global Parameters
page
.
2
Select
Enable
in the
SNMP Notifications
field.
3
Click
Apply Changes
.
SNMP notifications are enabled, and the device is updated.
Enabling Authentication Notifications
1
Open the
SNMP Global Parameters
page.
2
Select
Enable
in the
Authentication Notifications
field.
3
Click
Apply Changes
.
Enabling SNMP Notifications Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
SNMP Global Parameters page.
Table 6-48. SNMP Notification Commands
CLI Command Description
snmp-server enable traps
Enables the router to send Simple Network
Management Protocol traps
snmp-server trap
authentication
Enables the router to send Simple Network
Management Protocol traps when authentication
fails
show snmp
Checks the status of SNMP communications.
snmp-server engine ID local
{
engineid-string
|
default
}
Indicates the local device engine ID. The field
values is a hexadecimal string. Each byte in
hexadecimal character strings is two hexadecimal
digits. Each byte can be separated by a period or
colon. The Engine ID must be defined before
SNMPv3 is enabled.