Filter
Top Products
Configuring System Information 193
Defining SNMP View Settings
SNMP Views provide access or block access to device features or feature aspects. For example, a
view can be defined which states that SNMP group A has read only (R/O) access to Multicast
groups, while SNMP group B has read-write (R/W) access to Multicast groups. Feature access is
granted via the MIB name, or MIB Object ID.
The Up and Down arrows allow navigating through the MIB tree, and MIB branches.
To open the
SNMPv3 View Settings
page
,
click
System
→
SNMP
→
View Settings
in the tree view.
Figure 6-58. SNMPv3 View Settings
The
SNMPv3 View Settings
page contains the following fields:
View Name
— Contains a list of user-defined views. The view name can contain a maximum of 30
alphanumeric characters.
New Object ID Subtree
— Indicates the device feature OID included or excluded in the selected
SNMP view.
Selected from List
— Select the device feature OID by using the
Up
and
Down
buttons to
scroll through a list of all device OIDs.
Insert
— Specify the device feature OID.
View Type
— Indicates if the defined OID branch will be included or excluded in the selected
SNMP view.