Filter
Top Products
380 Configuring Quality of Service
www.dell.com | support.dell.com
Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
CoS to
Queue
page.
The following is an example of the CLI commands:
Mapping DSCP Values to Queues
The
DSCP to Queue
page provides fields for defining egress queue to specific DSCP fields. To
open the
DSCP to Queue
page, click
Quality of Service
→
QoS
Mapping
→
DSCP to Queue
in the
tree view.
Figure 9-4. DSCP to Queue
Table 9-111. CoS to Queue Settings CLI Commands
CLI Command Description
wrr-queue cos-map queue-id
cos0.cos7
Maps assigned CoS values to the egress
queues.
console(config)# wrr-queue cos-map 4 7