Filter
Top Products
Configuring System Information 141
Modifying a DHCP IP Interface
1
Open the
DHCP IP Interface
page.
2
Modify the fields.
3
Click
Apply Changes
.
The entry is modified, and the device is updated.
Deleting a DHCP IP Interface
1
Open the
DHCP IP Interface
page.
2
Click
Show All
.
The
DHCP Client Table
opens.
3
Select a DHCP client entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The selected entry is deleted, and the device is updated.
Defining DHCP IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining DHCP clients.
The following is an example of the CLI command:
Table 6-32. DHCP IP Interface CLI Commands
CLI Command Description
ip address
dhcp
[
hostname
host-name
]
To acquire an IP address on an Ethernet interface from the
Dynamic Host Configuration Protocol (DHCP).
console(config)# interface ethernet 1/e11
console(config-if)# ip address dhcp