Filter
Top Products
252 Configuring Switch Information
www.dell.com | support.dell.com
Defining LAG Parameters
The
LAG Configuration
page contains fields for configuring parameters for configured LAGs. The
device supports up to eight ports per LAG, and eight LAGs per system. For information about Link
Aggregated Groups (LAG) and assigning ports to LAGs, see
Aggregating Ports
.
To open the
Port Configuration
page, click
Switch
→
Ports
→
LAG Configuration
in the tree view.
Figure 7-14. LAG Configuration
Port Type Duplex Speed Neg Flow
Control
Link
State
Back
Pressure
Mdix
Mode
---- ----- ------ ------ ---- ------ ----- ------ ----
1/e3 100 Full 100 Auto On Up Enable On
1/e4 100 Full 1000 Off Off Up Disable On
Ch Type Duplex Speed Neg Flow
Control
Back
Pressure
Link
State
--- ---- ------ ----- ----- ------- -------- ------
1 1000 Full 1000 Off Off Disable Up