Filter
Top Products
Configuring System Information 169
Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Select Authentication
page.
The following is an example of the CLI commands:
Table 6-41. Select Authentication CLI Commands
CLI Command Description
enable authentication
[
default
|
list-name
]
Indicates the authentication method list when accessing
a higher privilege level from a remote Telnet, Console or
SSH.
login authentication
[
default
|
list-name
]
Indicates the login authentication method list for a
remote Telnet, Console or SSH.
ip http authentication
method1
[
method2
.]
Indicates authentication methods for HTTP servers.
ip https authentication
method1
[
method2
.]
Indicates authentication methods for HTTPS servers.
show authentication methods
Displays information about the authentication methods.
console(config-line)# enable authentication default
console(config-line)# login authentication default
console(config-line)# exit
console(config)# ip http authentication radius local
console(config)# ip https authentication radius local
console(config)# exit
console# show authentication methods
Login Authentication Method Lists
---------------------------------
Console_Default : None
Network_Default : Local
Enable Authentication Method Lists
----------------------------------
Console_Default : Enable None
Network_Default : Enable