Filter
Top Products
50 Installing the PowerConnect 3424/P and PowerConnect 3448/P
www.dell.com | support.dell.com
Unpacking the Device
NOTE: Before unpacking the device, inspect the package and immediately report any evidence of damage.
1
Place the box on a clean flat surface.
2
Open the box or remove the box top.
3
Carefully remove the device from the box and place it on a secure and clean surface.
4
Remove all packing material.
5
Inspect the device and accessories for damage. Report any damage immediately.
Mounting the Device
The following mounting instructions apply to The PowerConnect 3424/P and PowerConnect
3448/P devices. The Console port is on the back panel. The power connectors are positioned on the
back panel. Connecting a Redundant Power Supply (RPS) is optional, but is recommended.
The RPS connector is on the back panel of the devices.
Installing in a Rack
CAUTION: Read the Safety Information included in the Product Information Guide for safety
information on devices connected to or that support the SWI.
CAUTION: Disconnect all cables from the unit before mounting the device in a rack or cabinet.
CAUTION: When mounting multiple devices into a rack, mount the devices from the bottom up.