Filter
Top Products
332 Configuring Switch Information
www.dell.com | support.dell.com
The Bridge Multicast Forward All page contains the following fields:
VLAN ID
— Identifies a VLAN.
Ports
— Ports that can be added to a Multicast service.
LAGs
— LAGs that can be added to a Multicast service.
The
Bridge Multicast Forward All Switch/Port Control Settings Table
contains the settings for
managing router and port settings.
Managing Bridge Multicast Forward All Switch/Port Control Settings Table
The following table describes the controls used to set the port controls.
Attaching a Port to a Multicast Router or Switch
1
Open
Bridge Multicast Forward All
page.
2
Define the
VLAN ID
field.
3
Select a port in the
Ports
table, and assign the port a value.
4
Click
Apply Changes
.
The port is attached to the Multicast router or switch.
Attaching a LAG to a Multicast Router or Switch
1
Open
Bridge Multicast Forward All
page.
2
Define the
VLAN ID
field.
3
Select a port in the
LAGs
table, and assign the LAG a value.
4
Click
Apply Changes
.
The LAG is attached to the Multicast router or switch.
Table 7-92. Bridge Multicast Forward All Switch/Port Control Settings Table
Port Control Definition
D Attaches the port to the Multicast router or switch as a
dynamic port.
S Attaches the port to the Multicast router or switch as a
static port.
F Forbidden.
Blank The port is not attached to a Multicast router or switch.