Dell 3424P Computer Accessories User Manual


 
200 Configuring System Information
www.dell.com | support.dell.com
MD5
Password
— Indicates that HMAC-MD5-96 password is used for authentication. The
user should enter a password.
SHA Password
— Users are authenticated using the HMAC-SHA-96 authentication level.
The user should enter a password.
None
— No user authentication is used.
Password
(0-32 Characters)
— Modifies the user-defined password for a group. Passwords can
contain a maximum of 32 alphanumeric characters.
Authentication Key (MD5-16; SHA-20 hexa chars)
— Defines the HMAC-MD5-96 or HMAC-
SHA-96 authentication level. The authentication and privacy keys are entered to define the
authentication key. If only authentication is required, 16 bytes are defined for MD5. If both privacy
and authentication are required, 32 bytes are defined for MD5. Each byte in hexadecimal character
strings is two hexadecimal digits. Each byte can be separated by a period or a colon.
Privacy Key (16 hexa characters)
— If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 16 bytes are defined. Each byte in hexadecimal character
strings is two hexadecimal digits. Each byte can be separated by a period or colon.
Remove
— When checked, removes users from a specified group.
Adding Users to a Group
1
Open the
SNMPv3 User Security Model (USM)
page.
2
Click
Add
.
The
Add SNMPv3 User Name
page opens:
Figure 6-65. Add SNMPv3 User Name
3
Define the
relevant
fields.
4
Click
Apply Changes
.
The user is added to the group, and the device is updated.