Filter
Top Products
Configuring Switch Information 255
Configuring LAGs with CLI Commands
The following table summarizes the equivalent CLI commands for configuring LAGs as displayed
in the
LAG Configuration
page.
Table 7-68. LAG Configuration CLI Commands
CLI Command Description
interface port-channel
port-channel-
number
Enters the interface configuration mode of a
specific port-channel.
description
string
Adds a description to an interface
configuration.
shutdown
Disables interfaces that are part of the
currently set context.
speed
bps
Configures the speed of a given ethernet
interface when not using auto negotiation.
negotiation
[capability1
[capability2…capability5]
Enables interface speed auto negotiation
operation.
back-pressure
Enables Back Pressure on a given interface.
flowcontrol {auto | on | off }
Configures the Flow Control on a given
interface.
show interfaces configuration
[
ethernet
interface
|
port-channel
port-channel-number
]
Displays the configuration for all configured
interfaces.
show interfaces status
[
ethernet
interface
|
port-channel
port-
channel-number
]
Displays the status for all configured
interfaces.
show interfaces description
[
ethernet
interface
|
port-channel
port-channel-number
]
Displays the description for all configured
interfaces.
show interfaces port-channel
[
port-
channel-number
]
Displays Port-channel information (which
ports are members of that port-channel, and
whether they are currently active or not).