Filter
Top Products
284 Configuring Switch Information
www.dell.com | support.dell.com
Defining STP LAG Settings
Use the
Spanning Tree LAG Settings
page to assign STP aggregating ports parameters. To open
the Spanning Tree
LAG Settings
page, click
Switch
→
Spanning Tree
→
LAG Settings
in the tree
view.
Figure 7-24. Spanning Tree LAG Settings
console# show spanning-tree ethernet 1/e15 instance 12
Port 1/e15 enabled
State: discarding Role: alternate
Port id: 128.15 Port cost: 19
Type: P2p (configured: Auto) Internal Port Fast: No (configured:
No)
Designated bridge Priority : 32768 Address: 00:00:b0:07:07:49
Designated port id: 128.11 Designated path cost: 0
Guard root: Disabled
Number of transitions to forwarding state: 3
BPDU: sent 482, received 1035