Filter
Top Products
Configuring System Information 97
Month
— The month of the year in which DST begins every year. The possible field range is
Jan-Dec.
Time
— The time at which DST begins every year. The field format is Hour: Minute, for
example, 02:10.
To
— Defines the recurring time that DST ends each year. For example, DST ends locally every
fourth Friday in October at 5:00 am. The possible field values are:
Day
— The day of the week at which DST ends every year. The possible field range is
Sunday-Saturday.
Week
— The week within the month at which DST ends every year. The possible field range is 1-5.
Month
— The month of the year in which DST ends every year. The possible field range is
Jan-Dec.
Time
— The time at which DST ends every year. The field format is Hour:Minute, for
example, 05:30.
Selecting a Clock Source
1
Open the
Time Synchronization
page.
2
Define the
Clock Source
field.
3
Click
Apply Changes
.
The Clock source is selected, and the device is updated.
Defining Local Clock Settings
1
Open the
Time Synchronization
page.
2
Define the fields.
3
Click
Apply Changes
.
The local clock settings are applied.
Defining Clock Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Time Synchronization
page.
NOTE: The following steps must be completed before setting the summer clock:
1
Configure the summer time.
2
Define the time zone.
3
Set the clock.