Filter
Top Products
Installing System Components 111
Figure 3-25. Installing a Hard Drive Into a Drive Carrier
SAS Controller Cards
Removing a SAS Controller Card
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 65.
3
Disconnect the data cable(s) from the controller card.
1 screws (4) 2 drive carrier
3 hard drive
1
3
2