Filter
Top Products
86 Installing System Components
Figure 3-15. Installing a USB Memory Key
5
Close the system. See "Opening the System" on page 65.
6
Reconnect the system to power and restart the system.
7
Enter the System Setup program and verify that the USB key has been
detected by the system. See "Using the System Setup Program" on page 43.
TOE/iSCSI Key (Optional)
TOE, iSCSI, and other future functionalities for the system’s integrated NICs
are enabled by installing an optional NIC hardware key in the TOE_KEY
socket on the system board.
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
NOTE: TOE Operating system support and the Microsoft
®
scalable network pack
are required for TOE functionality.
1 USB memory key 2 USB memory key connector
1
2