Filter
Top Products
About Your System 23
E122A CPU # VTT Processor # VTT voltage
has exceeded the
allowable voltage range
See "Getting Help" on
page 179.
E122D CPU # VDDIO Processor # VDDIO
voltage has exceeded the
allowable voltage range
See "Getting Help" on
page 179.
E122E CPU # VDDA Processor # VDDA
voltage has exceeded the
allowable voltage range
See "Getting Help" on
page 179.
E122F 2.5V PwrGd 2.5V voltage regulator has
failed.
See "Getting Help" on
page 179.
E1231 1.2V HTCORE
PwrGd
1.2V HTCORE voltage
regulator has failed.
See "Getting Help" on
page 179.
E1232 VDD 12V PS#
PwrGd
The specified power
supply has failed or has
been removed from the
bay while the system
was on.
If removed, reinsert the
power supply into the bay
and reconnect to power.
For component failures,
see "Getting Help" on
page 179.
E123B LOM Mezz
PwrGd
Voltage regulator for the
NIC daughter card has
failed.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 179.
E123C Planar LOM
PwrGd
Voltage regulator for the
integrated NIC has failed.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 179.
E1310 RPM Fan ## RPM of specified cooling
fan is out of acceptable
operating range.
See "Troubleshooting
System Cooling
Problems" on page 155.
Table 1-7. LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes Corrective Actions