Filter
Top Products
38 About Your System
PCIe Degraded Link
Width Error:
Embedded
Bus#
nn
/Dev#
nn
/Func
n
Expected Link
Width is
n
Actual Link Width
is
n
Faulty or improperly
installed PCIe card in the
specified slot.
Reseat the PCIe card in the
specified slot number. See
"Installing an Expansion
Card" on page 78. If the
problem persists, see
"Getting Help" on
page 179.
PCIe Fatal Error
caused a system
reset: Slot
n
or
Embedded
Bus#
nn
/Dev#
nn
/Func
n
Please check the
system event log
for details.
Faulty or improperly
installed PCIe card in the
specified slot.
Reseat the PCIe card in the
specified slot number. See
"Installing an Expansion
Card" on page 78. If the
problem persists, see
"Getting Help" on
page 179.
PCI BIOS failed to
install
PCI device BIOS (Option
ROM) checksum failure
is detected during
shadowing. A cable to an
expansion card is
unseated; an expansion
card is faulty or
improperly installed.
Reseat the expansion cards
and expansion card cables.
If the problem persists, see
"Troubleshooting
Expansion Cards" on
page 164.
Plug & Play
Configuration
Error
Error encountered in
initializing PCI device;
faulty system board.
Install the NVRAM_CLR
jumper and reboot the
system. See Figure 6-1 for
jumper locations. If the
problem persists, see
"Troubleshooting
Expansion Cards" on
page 164.
Table 1-8. System Messages (continued)
Message Causes Corrective Actions