Filter
Top Products
138 Installing System Components
Figure 3-36. Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1
Position the three retention slots on the power distribution board with the
three retention tabs on the bottom of the chassis. See Figure 3-36.
2
Secure the power distribution board with the seven screws.
3
Install the system board. See step 4 through step 14 in "Installing the
System Board."
4
Install the power supplies. See "Replacing a Power Supply" on page 72.
1 retention notches (3) 2 power distribution board
3 screws (7) 4 retention tabs (3)
1
4
3
2