Filter
Top Products
Installing System Components 133
12
Remove the RAID battery compartment:
a
Lift the snap lever and gently pull the RAID battery compartment
straight up. See Figure 3-34.
b
Lift the battery compartment away from the side of the chassis.
Figure 3-34. Removing and Installing the RAID Battery Compartment
13
Remove the system board:
a
Pull up the spring-loaded blue retention pin located in the center of
the system board, and then slide the system board toward the front of
the chassis until it stops. See Figure 3-35.
1 RAID battery compartment 2 release tab
3 securing tabs (2) 4 securing slots (2)
2
1
3
4