Filter
Top Products
26 About Your System
E161C PS # Input
Lost
Power source for specified
power supply is
unavailable, or out of
acceptable range.
Check the AC power
source for the specified
power supply. If problem
persists, see
"Troubleshooting Power
Supplies" on page 154.
E1620 PS # Input
Range
Power source for specified
power supply is
unavailable, or out of
acceptable range.
Check the AC power
source for the specified
power supply. If problem
persists, see
"Troubleshooting Power
Supplies" on page 154.
E1624 PS
Redundancy
Power supply redundancy
has been lost. If the
remaining power supply
fails the system will shut
down.
See "Troubleshooting
Power Supplies" on
page 154.
E1625 PS AC
Current
Power source is out of
acceptable range.
Check the AC power
source.
E1710 I/O Channel
Chk
The system BIOS has
reported an I/O channel
check error.
See "Getting Help" on
page 179.
E1711 PCI PERR B##
D## F##
PCI PERR
Slot #
The system BIOS has
reported a PCI parity
error on a component
that resides in PCI
configuration space at
bus ##, device ##,
function ##.
The system BIOS has
reported a PCI parity
error on a component
that resides in PCI slot #.
Remove and reseat the
specified PCI expansion
card. If the problem
persists, see
"Troubleshooting
Expansion Cards" on
page 164. If
troubleshooting does not
resolve the problem, see
"Getting Help" on
page 179.
Table 1-7. LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes Corrective Actions