Filter
Top Products
96 Installing System Components
4
Remove the cooling shroud assembly:
– If you are installing memory modules on the system board, see
"Removing the Cooling Shroud Assembly" on page 69.
– If you are installing memory modules on the PEM, see Figure 3-9.
5
Locate the memory module sockets. See Figure 6-1 or Figure 6-2.
6
Press the ejectors on the memory module socket down and out, as shown
in Figure 3-19, to allow the memory module to be inserted into the socket.
7
Handle each memory module only on either card edge, ensuring not to
touch the middle of the memory module.
Figure 3-19. Installing and Removing a Memory Module
8
Align the memory module's edge connector with the alignment key of the
memory module socket, and insert the memory module in the socket.
NOTE: The memory module socket has an alignment key that allows you to
install the memory module in the socket in only one way.
1 memory module 2 memory module socket ejectors (2)
3 alignment key
2
1
3