Dell R905 Server User Manual


 
82 Installing System Components
Figure 3-13. Installing or Removing a Riser Board
Replacing the Riser Board
1
To install the riser board, make sure both riser retention latches are
completely open, then align the riser with the two riser guide posts on the
system board and lower the riser board onto the system board. See
Figure 3-13.
2
Close both retention latches at the same time until the latches are
horizontal and the riser board is locked into place.
1 riser board 2 retention latches (2)
3 riser board socket 4 riser guide posts (2)
3
2
1
4