Filter
Top Products
50 Using the System Setup Program
Table 2-5. Integrated Devices Screen Options
Option Description
Integrated
SAS/RAID
Controller
(Enabled default)
Enables or disables the integrated SAS controller.
Optical Drive
Controller
(On default)
Enables or disables the integrated optical drive controller.
User Accessible
USB Ports
(All Ports On
default)
Enables or disables the system’s user accessible USB ports.
Options are All Ports On, Only Back Ports On, and All Ports
Off.
Internal USB Port
(On default)
Enables or disables the system’s internal USB port.
SD Card Port Enables or disables the system’s internal SD card port.
NOTE: This port is dedicated to a hypervisor, if installed.
Embedded Gb
NICx
(NIC1 default:
Enabled with
PXE;
Other NICs:
Enabled)
Enables or disables the system's integrated NICs. Options are
Enabled, Enabled with PXE, Enabled with iSCSI Boot, and
Disabled. PXE support allows the system to boot from the
network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC. This field does not have user-selectable settings.
Capability
Detected
Displays the NIC features provided by the NIC hardware key
installed in the TOE_KEY socket on the system board.
NOTE: Some features may require the installation of an
additional driver.