Filter
Top Products
Installing System Components 137
Power Distribution Board (Service-Only
Procedure)
Removing the Power Distribution Board
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2
Open the system. See "Opening the System" on page 65.
3
Remove the power supplies. See "Removing a Power Supply" on page 71.
4
Remove the system board. See "Removing the System Board" on page 132.
5
Remove the seven screws securing the board. See Figure 3-36.
6
Lift the power distribution board out of the chassis.