Filter
Top Products
Installing System Components 127
6
Disconnect the power cable from the top of the peripheral interposer
board. See Figure 3-32.
NOTICE: When disconnecting the control-panel cable, hold the pull-tab on the
control-panel cable connector to prevent damage to the interposer board or the
cable itself.
7
Disconnect the control-panel cable from the control-panel cable
connector on the back of the interposer board. See Figure 3-32.
8
Disconnect the planar interface cable from the back of the interposer
board.
9
Disconnect the SATA cable from the back of the interposer board.