Filter
Top Products
Installing System Components 79
6
Install the expansion card:
a
Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the system
board.
NOTICE: If you are installing a SAS RAID controller card, do not press on the
memory module when installing the card.
b
Insert the card-edge connector firmly into the expansion-card
connector until the card is fully seated.
c
Close the expansion-card retainer. See Figure 3-11.
Figure 3-11. Installing or Removing an Expansion Card
1 expansion card 2 expansion-card retainer
3 card-edge connector
3
2
1