Filter
Top Products
Asianux AX [AMD64]
No.
Operating
System Host Bus Adapter
Network
Configuration
Storage
Array
External
Boot Comments
1 Asianux AX
[AMD64] 1.0
SP3
7, 8, 9
Generic NIC 10/100
13, 14
, Generic NIC GbE
13, 14
, QLogic QLA4010−E−SP
1, 2, 3, 4, 5, 6
, QLogic
QLA4010C−E−SP
1, 2, 3, 4, 5, 6
, QLogic QLA4050−E−SP
2, 4, 5, 6, 15, 16
, QLogic
QLA4050C−E−SP
2, 4, 5, 6, 15, 16
, QLogic QLA4052C−E−SP
4, 5, 6, 16, 19, 20
LAN Only
11, 12
EMC
CLARiiON
AX150i
N See
10, 11
2 Asianux AX
[AMD64] 1.0
SP3
7, 8, 9
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
2, 6, 17, 18
LAN Only
11, 12
EMC
CLARiiON
AX150i
N
1. BIOS 1.11 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
2. Driver Version 3.27 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
3. Firmware Version 3.00.00.16
4. Require BIOS, Driver and Firmware available from EMC−approved section of Qlogic website.
5. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
6. Requires SANsurfer for installation and configuration and is available for download from the EMC−approved section of the QLogic website at http://www.qlogic.com
7. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
8. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
9. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
10. The software initiator is part of the operating system and not an EMC software product. Please refer to the required release note "EMC Linux iSCSI Attach Release Notes", p/n
300−002−672, that can be found on EMC's Powerlink website in Support −> The Document Library −> Host Connectivity for the complete installation information.
11. LAN support includes direct connect (layer 2), switched (layer 2), or routed (layer 3) networks. Network should be designed to minimize packet loss or any other interruptions.
12. Routed networks (layer 3) require iSCSI digest to be enabled.
13. NIC teaming with the Linux software initiator is not supported.
14. Driver Version iSCSI initiator 3.6.3 Driver is integrated into the kernel.
15. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
16. Firmware Version 3.01.00.49 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
17. BIOS 1.09a Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
18. Firmware Version 2.00.00.45 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
19. BIOS 1.08
20. Driver Version 3.27
Asianux AX [EM64T]
Asianux AX [EM64T]
No.
Operating
System Host Bus Adapter
Network
Configuration
Storage
Array
External
Boot Comments
1 Asianux AX
[EM64T] 1.0
GA
3, 4, 5
Generic NIC 10/100
1, 6
, Generic NIC GbE
1, 6
LAN Only
7, 8
EMC
CLARiiON
AX150i
N See
2
2 Asianux AX
[EM64T] 1.0
SP3
5, 10, 11
Generic NIC 10/100
6, 20
, Generic NIC GbE
6, 20
, QLogic QLA4010−E−SP
9, 13, 15, 16, 22, 23
,
QLogic QLA4010C−E−SP
9, 13, 15, 16, 22, 23
, QLogic QLA4050−E−SP
9, 13, 15, 16, 19, 21
, QLogic
QLA4050C−E−SP
9, 13, 15, 16, 19, 21
, QLogic QLA4052C−E−SP
9, 15, 16, 17, 18, 19
LAN Only
7, 8
EMC
CLARiiON
AX150i
N See
2, 8
3 Asianux AX
[EM64T] 1.0
SP3
5, 10, 11
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
9, 12, 13, 14
LAN Only
7, 8
EMC
CLARiiON
AX150i
N
1. Driver Version iSCSI Initiator 3.6.2−3 Available from the OS distributor by request.
2. The software initiator is part of the operating system and not an EMC software product. Please refer to the required release note "EMC Linux iSCSI Attach Release Notes", p/n
300−002−672, that can be found on EMC's Powerlink website in Support −> The Document Library −> Host Connectivity for the complete installation information.
3. Support kernels: 2.4.21−20.19AX, 2.4.21−20.29AX. Confirm kernel version with server vendor.
4. Asianux 1.0 GA include Red Flag DC Server 4.1 GA, Miracle Linux MLSE 3.0 GA.
5. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
6. NIC teaming with the Linux software initiator is not supported.
7. Routed networks (layer 3) require iSCSI digest to be enabled.
8. LAN support includes direct connect (layer 2), switched (layer 2), or routed (layer 3) networks. Network should be designed to minimize packet loss or any other interruptions.
9. Requires SANsurfer for installation and configuration and is available for download from the EMC−approved section of the QLogic website at http://www.qlogic.com
10. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
11. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
12. Firmware Version 2.00.00.45 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
13. Driver Version 3.27 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
14. BIOS 1.09a Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
15. Require BIOS, Driver and Firmware available from EMC−approved section of Qlogic website.
16. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
17. BIOS 1.08
18. Driver Version 3.27
19. Firmware Version 3.01.00.49 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
20. Driver Version iSCSI initiator 3.6.3 Driver is integrated into the kernel.
21. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
22. Firmware Version 3.00.00.16
23. BIOS 1.11 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
Asianux AX [x86_64]
Asianux AX [x86_64]
No.
Operating
System Host Bus Adapter
Network
Configuration
Storage
Array
External
Boot Comments
1 Asianux AX
[x86_64] 2.0
GA
2, 23, 24
Generic NIC 10/100
21, 22
, Generic NIC GbE
21, 22
LAN Only
8, 9
EMC
CLARiiON
AX150i
N
2 Asianux AX
[x86_64] 2.0
SP1
2, 14, 15
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
7, 12, 18, 19, 20
, QLogic
QLA4010−E−SP
6, 7, 11, 12, 13
, QLogic QLA4010C−E−SP
6, 11, 13, 16, 17
, QLogic
QLA4050−E−SP
4, 5, 6, 7, 27
, QLogic QLA4050−E−SP
4, 5, 6, 7, 31
, QLogic QLA4050C−E−SP
4,
5, 6, 7, 27
, QLogic QLA4050C−E−SP
4, 5, 6, 7, 31
LAN Only
8, 9
EMC
CLARiiON
AX150i
N
3 Asianux AX
[x86_64] 2.0
SP2
1, 2, 3
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
7, 10, 18, 19, 20
, QLogic
QLA4010−E−SP
6, 7, 10, 11, 13
, QLogic QLA4010C−E−SP
6, 10, 11, 13
, QLogic
QLA4050−E−SP
4, 5, 6, 7, 10
, QLogic QLA4050C−E−SP
4, 5, 6, 7, 10
LAN Only
8, 9
EMC
CLARiiON
AX150i
N
CLARiiON AX150i
03/04/2009 997 CLARiiON AX150i