Filter
Top Products
44. Firmware Version 2.70a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
45. BIOS 1.23 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
46. BIOS 2.01a2 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
47. Requires BIOS 1.05 available from the EMC−approved section of the QLogic website at http://www.qlogic.com
48. BIOS 1.64 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
49. Please see the HP website for supported BL c−Class model numbers.
The supported model numbers are available in the quickspecs documents available for each BL c−Class blade.
50. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
51. BIOS 6.00a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
52. BIOS 1.70a3
53. EMC provides documentation for boot configurations that contains helpful information for systems booting from EMC storage. Visit EMC Powerlink and download part number
300−000−603 for the Windows Host Connectivity Guide.
54. Firmware Version 2.72a2
55. Driver Version 8.01.05 Driver/BIOS are available at http://www.qlogic.com
56. Kernels supported: 2.6.9−34.21AX.
Confirm kernel support with server vendor.
57. Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, Haansoft 2006 Server Asianux Server 2.0 SP1.
58. Driver Version 8.0.16.18 Driver is integrated into the kernel.
59. Driver/BIOS are available at http://www.qlogic.com
60. Mixing 2Gb and 4Gb fibre channel expansion cards is not supported in this server.
61. BIOS 1.52 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
62. Booting from the SAN with PowerPath is supported. Refer to the Path Management Software section for supported versions of PowerPath.
63. BIOS 3.03a3 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
64. PowerEdge 2550 and PowerVault 775N support a maximum of 2 Emulex HBAs at one time and the total PCI power cannot exceed 20 Watts.
65. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
66. EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an RPQ.
67. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
68. Driver Version 7.07.04−b6 Driver is integrated into the kernel.
69. Driver Version 7.3.6 Driver is integrated into the kernel.
70. VxVM is not supported on servers booting from the array.
71. BIOS 1.05
72. Internal port(s) on QLogic or McData 4Gb FC switch module(s) must be set to 4Gb to SAN boot.
73. BIOS 3.02a6
74. PCI−X slots in this server only support low−profile hbas with low−profile brackets. Please ensure your HBA vendor has included the proper bracket to fit this server.
75. Driver Version 7.07.05 Driver/BIOS are available at http://www.qlogic.com
76. BIOS 1.02 Driver/BIOS are available at http://www.qlogic.com
77. Internal port(s) on Qlogic or McData 4Gb FC switch module(s) must be set to 4Gb (if 4Gb operation is required or to 2Gb if 2Gb operation is required)
78. BIOS 3.02a6 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
79. Requires IBM Multi−Switch Interconnect Module for IBM BladeCenter (39Y9314) installed in IBM BladeCenter H and with appropriate fibre channel switch modules to installed in bays
8 & 10.
80. Driver Version 7.07.05
81. BIOS 1.02
82. Single node support only with Emulex 4Gb HBAs
83. Driver Version 7.07.04b6 Driver is integrated into the kernel.
84. BIOS 1.43 Supports BIOS 1.43. Available at http://www.qlogic.com
85. BIOS 1.12 Requires BIOS 1.12 available in the EMC−approved section of the QLogic website at http://www.qlogic.com
86. Support for 4GB fibre channel HBAs requires an IBM SPORE to be submitted to IBM with a request of system BIOS 56A.
87. This system is supported only when the IBM ServeRAID 8i SAS RAID controller (13N227) is installed or when the server is being booted remotely from external storage.
88. Certain HBA models may be too large to fit into this server's PCI or PCI−X slots. A low−profile HBA may be required. Consult your server owner's guide before
purchasing HBAs for this server.
89. This HBA is equivalent to the QLogic QLA2340.
90. BIOS 1.12
91. BIOS 1.43
92. FCode Value 1.70a3 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
93. Dual port PCI−X fibre channel mezzanine card option is embedded. No PCI/PCI−X slots available.
94. Firmware Version 1.91a2 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
95. BIOS 1.48 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
96. Firmware Version 1.90a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
97. BIOS 1.12 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
98. Driver Version 8.01.04−d8 Driver is integrated into the kernel.
Asianux AX [32−Bit] 2.0
Asianux AX [32−Bit] 2.0
No. Host System
Operating
System
Host
Bus Host Bus Adapter Topology
Storage
Array
External
Boot
1 Dell PowerEdge: 1550, 2300, 2400, 2450, 2500, 2550
19
, 4300,
4350, 4400, 6100, 6300, 6350, 6400, 6450, 8450;
HPQ Proliant: DL320, DL360, DL360 (G2), DL380, DL380 (G2),
DL380 (G3), DL580 (G2)
6
, DL580
6
, ML350 (G2)
6
, ML350
(G3)
6
, ML350
6
, ML370 (G2)
6
, ML370
6
, ML530 (G2)
6
, ML530
(G3)
6
, ML530
6
, ML570
6
, ML750
6
Asianux AX
[32−Bit] 2.0
SP3
PCI Emulex LP101−E
1, 3, 4, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
2 Dell PowerEdge: 1550, 2300, 2400, 2450, 2500, 2550
19
, 4300,
4350, 4400, 6100, 6300, 6350, 6400, 6450, 8450
Asianux AX
[32−Bit] 2.0
SP3
PCI Emulex LP1050−E
1, 3, 4, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
3 HPQ Proliant: DL320, DL360, DL360 (G2), DL580
6
, ML350
(G2)
6
, ML350 (G3)
6
, ML350
6
, ML370 (G2)
6
, ML370
6
, ML530
(G2)
6
, ML530 (G3)
6
, ML530
6
, ML570
6
, ML750
6
Asianux AX
[32−Bit] 2.0
SP3
PCI Emulex LP1050−E
3, 4, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
4 NEC Express 5800: 120Rd−1, 120Rf−2, 140Hd, 140Rc−4,
180Rd−4
Asianux AX
[32−Bit] 2.0
SP3
PCI NEC N8190−120 (LP1050)
3, 4, 8, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
5 Dell PowerEdge: 1800, 2800, 2850, 6800, 6850 Asianux AX
[32−Bit] 2.0
SP3
PCI
Express
Emulex LP101−E
1, 3, 4, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
6 Dell PowerEdge: 1800, 2800, 2850 Asianux AX
[32−Bit] 2.0
SP3
PCI
Express
Emulex LP1050−E
1, 3, 4, 10
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
7 HPQ Proliant: DL380 (G4), DL580 (G3)
6
, ML370 (G4)
6
;
Hewlett Packard Proliant DL360: (G4), (G4p);
Hewlett Packard Proliant ML350: (G4), (G4p)
Asianux AX
[32−Bit] 2.0
SP3
PCI
Express
Emulex LPe111−E
1, 2, 3, 4
;
HPQ A8002A/FC2142SR (LPe1150)
1,
2, 3, 4
FC−AL,
FC−SW
EMC
CLARiiON
AX150
Y
5
CLARiiON AX150
03/04/2009 27 CLARiiON AX150