Filter
Top Products
60. Driver/BIOS are available at http://www.qlogic.com
61. Powerpath is supported in boot from SAN configurations for Windows 2003 systems running STORPort drivers (QLogic & Emulex). Windows 2003 servers using STORPort drivers
require a Microsoft STORPort hotfix installed to boot with Powerpath. Please see your driver's requirements for the STORPort hotfix (QFE) version.
62. Mixing 2Gb and 4Gb fibre channel expansion cards is not supported in this server.
63. Virtual machines running on VMWare ESX are supported booting from the array.
64. VMWare ESX Server itself is supported booting from external array.
65. PowerPath is not supported.
66. BIOS 1.52 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
67. EMC recommends upgrading to the most recent, EMC−Approved, HBA driver.
68. Driver Version 8.0.16.40 Driver is integrated into the kernel.
69. Driver Version 8.2.0.333.3p Driver is integrated into the kernel.
70. When booting from an external storage array, press F1 during server POST and set BIOS Start Options to point to the bus slot containing the SAN boot adapter (Default is Planar
SCSI.)
71. Driver Version 8.01.07−k1 Driver is integrated into the kernel.
72. Driver Version 8.01.04−d8 Driver is integrated into the kernel.
73. BIOS 3.02a6
74. BIOS 1.05
75. BIOS 2.00a1
76. Driver Version 8.0.16.34 Driver is integrated into the kernel.
77. BIOS 3.03a3 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
78. Firmware Version 2.70a5
79. Firmware Version 1.90a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
80. FSC Fibre Channel module. Dual channel 4GBit/s HBA for BX6xx−series blade servers only.
81. BIOS 3.02a6 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
82. Internal port(s) on Qlogic or McData 4Gb FC switch module(s) must be set to 4Gb (if 4Gb operation is required or to 2Gb if 2Gb operation is required)
83. Driver Version 8.0.14.34 Driver is integrated into the kernel.
84. Requires IBM Multi−Switch Interconnect Module for IBM BladeCenter (39Y9314) installed in IBM BladeCenter H and with appropriate fibre channel switch modules to installed in
bays 8 & 10.
85. Supported kernels: 2.6.18−8.EL5, 2.6.18−8.0.0.4.1.EL5, 2.6.18−8.1.4.0.1.EL5, 2.6.18−8.1.6.0.1.EL5, 2.6.18−8.1.8.0.1.EL5, 2.6.18−8.1.10.0.1.EL5, 2.6.18−8.1.14.0.2.EL5,
2.6.18−8.1.15.0.1.EL5, 2.6.18−53.1.21.0.1.el5. Confirm kernel support with server vendor.
86. Driver Version 8.2.0.33..3p Driver is integrated into the kernel.
87. Driver Version 8.1.10.3 Driver is integrated into the kernel.
88. BIOS 1.70a3
89. Supported kernels: 2.6.9−55.0.0.0.2.EL, 2.6.9−55.0.2.0.1.EL, 2.6.9−55.0.6.0.1.EL, 2.6.9−55.0.9.0.1.EL, and 2.6.9−55.0.12.0.1.EL.
Confirm kernel support with server vendor.
90. BX6xx−series systems use an embedded fibre channel controller. Contact Fujitsu Siemens to acquire the proper BIOS for the embedded fibre channel controller.
91. FSC Fibre Channel module. Dual channel 2GBit/s HBA for BX6xx−series blade servers only.
92. PCI−X slots in this server only support low−profile hbas with low−profile brackets. Please ensure your HBA vendor has included the proper bracket to fit this server.
93. Support for 4GB fibre channel HBAs requires an IBM SPORE to be submitted to IBM with a request of system BIOS 56A.
94. FCode Value 2.72a2
95. Please see the HP website for supported BL c−Class model numbers.
The supported model numbers are available in the quickspecs documents available for each BL c−Class blade.
96. BIOS 1.64 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
97. BIOS 6.00a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
98. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LPe1150−E.
99. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LP1050−E.
100. Firmware Version 1.91a5
101. NEC SigmaBlade servers are not supported with Windows 2003 SP1 (x86 and x64 versions.)
102. Driver Version 8.02.00−k5−rhel5.2−04 Driver is integrated into the kernel.
103. This HBA is equivalent to the Qlogic QLE2562
104. This HBA is equivalent to the Qlogic QLE2560
105. This HBA is equivalent to the Emulex LPe12002
106. This HBA is equivalent to the Emulex LPe12000
107. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
108. BIOS 3.03a7 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
109. Firmware Version 1.00a12 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
110. BIOS 1.24
Red Hat RHEL [32−Bit]
Red Hat RHEL [32−Bit]
No. Host System
Operating
System Host Bus Host Bus Adapter Topology
Storage
Array
External
Boot Comments
1 HPQ Proliant: BL30p, BL35p Red Hat
RHEL
[32−Bit]
3.0 U7
AS/ES
4, 6,
34
PCI−X
86
HPQ Dual−port Fibre
Channel Adapter for HP
Proliant BL30p/BL35p
354054−B21
85, 99
FC−AL EMC
CLARiiON
AX150
Y
2 HPQ Proliant BL20p: (G3), (G4) Red Hat
RHEL
[32−Bit]
3.0 U7
AS/ES
4, 6,
34
PCI−X
86
HPQ HP QLogic−based
Fibre Channel Mezzanine
HBA for BL20p G3/BL20p
G4 361426−B21
85, 99
FC−AL EMC
CLARiiON
AX150
Y
3 HPQ Proliant BL45p (G2) Red Hat
RHEL
[32−Bit]:
3.0 U8
AS/ES
4, 6,
56
, 3.9
AS/ES
4, 5,
6
PCI−X HPQ HP QLogic−based
Fibre Channel Mezzanine
HBA for BL20p G3/BL20p
G4 361426−B21
2, 85
FC−AL EMC
CLARiiON
AX150
Y
4 HPQ Proliant: BL30p, BL35p Red Hat
RHEL
[32−Bit]:
3.0 U8
AS/ES
4, 6,
56
, 3.9
AS/ES
4, 5,
6
PCI−X
86
HPQ Dual−port Fibre
Channel Adapter for HP
Proliant BL30p/BL35p
354054−B21
2, 85
FC−AL EMC
CLARiiON
AX150
Y
5 HPQ Proliant BL20p: (G3), (G4);
HPQ Proliant BL25p (G2)
Red Hat
RHEL
[32−Bit]:
3.0 U8
AS/ES
4, 6,
56
, 3.9
AS/ES
4, 5,
6
PCI−X
86
HPQ HP QLogic−based
Fibre Channel Mezzanine
HBA for BL20p G3/BL20p
G4 361426−B21
2, 85
FC−AL EMC
CLARiiON
AX150
Y
CLARiiON AX150
03/04/2009 413 CLARiiON AX150