EMC AX150 Series Network Card User Manual


  Open as PDF
of 1015
 
CLARiiON AX150i
Native iSCSI
Asianux AX [32−Bit]
Asianux AX [32−Bit]
No.
Operating
System Host Bus Adapter
Network
Configuration
Storage
Array
External
Boot Comments
1 Asianux AX
[32−Bit] 1.0
SP1
6, 10, 11
Generic NIC 10/100
2, 9
, Generic NIC GbE
2, 9
LAN Only
3, 4
EMC
CLARiiON
AX150i
N See
8
2 Asianux AX
[32−Bit] 1.0
SP3
6, 22, 23, 24
Generic NIC 10/100
2, 41
, Generic NIC GbE
2, 41
, QLogic QLA4010−E−SP
16, 17, 27, 32, 34, 35
,
QLogic QLA4010C−E−SP
16, 17, 27, 32, 34, 35
, QLogic QLA4050−E−SP
13, 16, 17, 18, 27, 32
,
QLogic QLA4050C−E−SP
13, 16, 17, 18, 27, 32
, QLogic QLA4052C−E−SP
13, 16, 17, 25, 26, 27
LAN Only
3, 4
EMC
CLARiiON
AX150i
N See
4, 8
3 Asianux AX
[32−Bit] 1.0
SP3
6, 22, 23, 24
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
17, 29, 31, 32
LAN Only
3, 4
EMC
CLARiiON
AX150i
N
4 Asianux AX
[32−Bit] 2.0
GA
5, 6, 7
Generic NIC 10/100
1, 2
, Generic NIC GbE
1, 2
LAN Only
3, 4
EMC
CLARiiON
AX150i
N
5 Asianux AX
[32−Bit] 2.0
SP1
6, 14, 15
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
17, 28, 29, 30, 31
, QLogic
QLA4010−E−SP
16, 17, 28, 34, 35
, QLogic QLA4010C−E−SP
16, 34, 35, 36, 37
, QLogic
QLA4050−E−SP
12, 13, 16, 17, 18
, QLogic QLA4050−E−SP
13, 16, 17, 18, 42
, QLogic
QLA4050C−E−SP
12, 13, 16, 17, 18
, QLogic QLA4050C−E−SP
13, 16, 17, 18, 42
LAN Only
3, 4
EMC
CLARiiON
AX150i
N
6 Asianux AX
[32−Bit] 2.0
SP2
6, 19, 20
IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
17, 21, 29, 30, 31
, QLogic
QLA4010−E−SP
16, 17, 21, 34, 35
, QLogic QLA4010C−E−SP
16, 21, 34, 35
, QLogic
QLA4050−E−SP
13, 16, 17, 18, 21
, QLogic QLA4050C−E−SP
13, 16, 17, 18, 21
LAN Only
3, 4
EMC
CLARiiON
AX150i
N
7 Asianux AX
[32−Bit] 2.0:
SP1
6, 14, 15
,
SP2
6, 19, 20
Generic NIC 10/100
2, 33
, Generic NIC GbE
2, 33
LAN Only
3, 4
EMC
CLARiiON
AX150i
N See
4, 8
8 Asianux AX
[32−Bit] 3.0
6, 38,
39
Generic NIC 10/100
2, 40
, Generic NIC GbE
2, 40
LAN Only
3, 4
EMC
CLARiiON
AX150i
N See
4, 8
1. Driver Version iSCSI Software Initiator 4:0.1.11 Driver is integrated into the kernel.
2. NIC teaming with the Linux software initiator is not supported.
3. Routed networks (layer 3) require iSCSI digest to be enabled.
4. LAN support includes direct connect (layer 2), switched (layer 2), or routed (layer 3) networks. Network should be designed to minimize packet loss or any other interruptions.
5. Asianux 2.0 GA include Redflag DC Server 5.0 GA, Miracle Linux v4.0 GA, Haansoft 2006 Server Asianux Server 2.0.
6. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
7. Supported kernels: 2.6.9−11.19AX.
Confirm kernel support with server vendor.
8. The software initiator is part of the operating system and not an EMC software product. Please refer to the required release note "EMC Linux iSCSI Attach Release Notes", p/n
300−002−672, that can be found on EMC's Powerlink website in Support −> The Document Library −> Host Connectivity for the complete installation information.
9. Driver Version iSCSI Initiator 3.6.2−3 Available from the OS distributor by request.
10. Support kernels: 2.4.21−20.19AX, 2.4.21−20.29AX. Confirm kernel version with server vendor.
11. Asianux 1.0 GA include Red Flag DC Server 4.1 GA, Miracle Linux MLSE 3.0 GA.
12. Driver Version 3.23 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
13. Firmware Version 3.01.00.49 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
14. Kernels supported: 2.6.9−34.21AX.
Confirm kernel support with server vendor.
15. Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, Haansoft 2006 Server Asianux Server 2.0 SP1.
16. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
17. Requires SANsurfer for installation and configuration and is available for download from the EMC−approved section of the QLogic website at http://www.qlogic.com
18. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
19. Asianux 2.0 SP2 include Redflag DC Server 5.0 SP2, Miracle Linux v4.0 SP2, Haansoft 2006 Server Asianux Server 2.0 SP2.
20. Support kernel: 2.6.9−42.7AX. Contact server vendor for support.
21. Driver Version 5.00.07 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
22. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
23. EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an RPQ.
24. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
25. BIOS 1.08
26. Driver Version 3.27
27. Require BIOS, Driver and Firmware available from EMC−approved section of Qlogic website.
28. Driver Version 5.00.04 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
29. BIOS 1.09a Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
30. Requires QLogic firmware version 2.00.00.07 available from the EMC−approved section of the QLogic website at http://www.qlogic.com
31. Firmware Version 2.00.00.45 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
32. Driver Version 3.27 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
33. Driver Version iSCSI Software Initiator 4.0.1.11 Driver is integrated into the kernel.
34. Firmware Version 3.00.00.16
35. BIOS 1.11 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
36. Driver Version 5.00.04 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com Requires SANsurfer for installation and configuration and is available for
download from the EMC−approved section of the QLogic website at http://www.qlogic.com
37. Requires QLogic firmware version 3.00.00.4 available from the EMC−approved section of the QLogic website at http://www.qlogic.com
38. Includes Redflag DC Server, Miracle Linux and Haansoft Asianux Server.
39. Supported kernels: 2.6.18−8.10AX.
Confirm kernel support with server vendor.
40. Driver Version iSCSI Software Initiator 2.x Only the software initiator driver native to this Linux distributor's release is supported. The iSCSI utilities are needed to configure the
software initiator and are a seperate package from the driver. Please refer to the Linux distributor for the supported version with their distribution.
41. Driver Version iSCSI initiator 3.6.3 Driver is integrated into the kernel.
42. Driver Version 5.00.04 Driver is integrated into the kernel. Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
Asianux AX [AMD64]
03/04/2009 996 CLARiiON AX150i