Filter
Top Products
6. SNIA HBA API Supported.
7. Driver Version 8.2.0.22 Driver is integrated into the kernel.
8. BIOS 2.02a1 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
9. Firmware Version 2.80a4 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
10. Booting from the SAN with PowerPath is supported. Refer to the Path Management Software section for supported versions of PowerPath.
11. Support kernel: 2.6.9−78.8AXS2. Contact server vendor for support.
12. Native multipathing is not supported on boot−from−SAN configurations.
13. Asianux 2.0 SP3 include Redflag DC Server 5.0 SP3, Miracle Linux v4.0 SP3, Haansoft 2006 Server Asianux 2.0 SP3.
14. Driver Version 8.02.09−d0−rhel4.7−04 Driver is integrated into the kernel.
15. BIOS 1.47 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
16. Driver Version 8.01.07−k7 Driver is integrated into the kernel.
17. BIOS 2.02 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
18. Legacy (x86) boot mode supported only for this server. EFI boot is not supported. EFI boot code should be removed from the HBA if installed.
19. EMC provides in−depth documentation for configurations with QLogic adapters that contains helpful information for installing and configuring QLogic adapters with EMC Storage. This
documentation is located in the EMC section of the QLogic website (http://www.qlogic.com) along with HBA drivers, and BIOS.
20. Asianux 2.0 SP2 include Redflag DC Server 5.0 SP2, Miracle Linux v4.0 SP2, Haansoft 2006 Server Asianux Server 2.0 SP2.
21. Supported kernels: 2.6.9−42.7AX.
Confirm kernel support with server vendor.
22. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LPe1150−E.
23. Driver Version 8.0.16.27 Driver is integrated into the kernel.
24. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
25. Please see the HP website for supported BL c−Class model numbers.
The supported model numbers are available in the quickspecs documents available for each BL c−Class blade.
26. BIOS 1.64 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
27. BIOS 1.52
28. EMC VolumeLogix Software required for multiple BladeServers when direct−attached to EMC Symmetrix storage.
29. Mixing 2Gb and 4Gb fibre channel expansion cards is not supported in this server.
30. Virtual machines running on VMWare ESX are supported booting from the array.
31. VMWare ESX Server itself is supported booting from external array.
32. PowerPath is not supported.
33. BIOS 1.52 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
34. BIOS 2.01 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
35. Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
36. BIOS 6.00a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
37. BIOS 1.05 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
38. BIOS 1.23 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
39. Supported kernels: 2.6.18−8.10AX.
Confirm kernel support with server vendor.
40. Driver Version 8.1.10.3 Driver is integrated into the kernel.
41. BIOS 1.54 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
42. Firmware Version 1.91a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
43. Driver Version 8.0.16.40 Driver is integrated into the kernel.
44. BIOS 1.24 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
45. Driver Version 8.01.06 Driver/BIOS are available at http://www.qlogic.com
46. Requires BIOS 1.05 available from the EMC−approved section of the QLogic website at http://www.qlogic.com
47. Firmware Version 2.70a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
48. Firmware Version 2.72a2 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
49. Driver Version 8.01.04−d7 Driver is integrated into the kernel.
50. BIOS 2.01a2 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
51. HPQ (Compaq) Proliant server models that are not listed in the ESM but are only differentiated from supported models by an "R" designator, are rack−mountable servers and are
supported.
52. PowerEdge 2550 and PowerVault 775N support a maximum of 2 Emulex HBAs at one time and the total PCI power cannot exceed 20 Watts.
53. Firmware Version 2.70a5
54. Firmware Version 1.91a5
55. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LP1050−E.
56. Driver Version 8.01.07−k1 Driver is integrated into the kernel.
57. Firmware Version 1.92a1 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
58. BIOS 1.70a3
59. EMC provides documentation for boot configurations that contains helpful information for systems booting from EMC storage. Visit EMC Powerlink and download part number
300−000−603 for the Windows Host Connectivity Guide.
60. Driver/BIOS are available at http://www.qlogic.com
61. Firmware Version 2.72a2
62. BIOS 3.03a3 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
63. Driver Version 8.01.05 Driver/BIOS are available at http://www.qlogic.com
64. Kernels supported: 2.6.9−34.21AX.
Confirm kernel support with server vendor.
65. Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, Haansoft 2006 Server Asianux Server 2.0 SP1.
66. Driver Version 8.0.16.18 Driver is integrated into the kernel.
67. EMC recommends upgrading to the most recent, EMC−Approved, HBA driver.
68. BIOS 3.02a6
69. Internal port(s) on QLogic or McData 4Gb FC switch module(s) must be set to 4Gb to SAN boot.
70. PCI−X slots in this server only support low−profile hbas with low−profile brackets. Please ensure your HBA vendor has included the proper bracket to fit this server.
71. BIOS 3.02a6 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
72. Internal port(s) on Qlogic or McData 4Gb FC switch module(s) must be set to 4Gb (if 4Gb operation is required or to 2Gb if 2Gb operation is required)
73. Requires IBM Multi−Switch Interconnect Module for IBM BladeCenter (39Y9314) installed in IBM BladeCenter H and with appropriate fibre channel switch modules to installed in bays
8 & 10.
74. Driver Version 8.01.02−d4 Driver is integrated into the kernel.
75. Single node support only with Emulex 4Gb HBAs
76. Driver Version 8.01.04−d8 Driver is integrated into the kernel.
77. BIOS 1.24
78. BIOS 1.05
79. BIOS 2.04 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
Fujitsu Siemens Solaris
Fujitsu Siemens Solaris
No. Host System
Operating
System
Host
Bus Host Bus Adapter Topology
Storage
Array
External
Boot
1 Fujitsu Siemens
PRIMEPOWER: 200,
250, 400, 450, 600,
650, 850
Fujitsu
Siemens
Solaris 10
22,
23, 24, 25
PCI Fujitsu Siemens: LP10000−E (GP70F−CF33)
2, 5, 6, 9, 10, 12, 13, 26, 27, 28, 29
,
LP11000−E (GP70F−CF36)
6, 9, 15, 18, 19, 20, 21
, LP9002−E (LP9002L−E)
GP70F−CF30
2, 5, 6, 11, 12, 30, 31, 32, 33
, LP9802−E (GP70F−CF31)
2, 5, 6, 9, 10, 11,
12, 13, 30, 31
FC−AL,
FC−SW
EMC
CLARiiON
AX150
N
CLARiiON AX150
03/04/2009 59 CLARiiON AX150