Filter
Top Products
29. Driver Version 9.1.7.16 Requires Microsoft STORPort hotfix Q943545. Please see http://support.microsoft.com/kb/943545. NOTE: Hotfix Q943545 requires a minimum of Service
Pack 1 (SP1) to be installed before the hotfix can be installed.
To obtain this hotfix, fill out the hotfix request form at http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=943545&kbln=en−us STORPort Miniport Driver
30. This HBA is equivalent to the Emulex LPe12002
31. This HBA is equivalent to the Emulex LPe12000
32. This HBA is equivalent to the Qlogic QLE2562
33. This HBA is equivalent to the Qlogic QLE2560
34. Driver Version 9.1.7.26 STORPort Miniport Driver
35. BIOS 2.06
36. BIOS 3.03a7
37. Driver Version 9.1.4.15 Requires Microsoft STORPort hotfix Q943545. Please see http://support.microsoft.com/kb/943545. NOTE: Hotfix Q943545 requires a minimum of Service
Pack 1 (SP1) to be installed before the hotfix can be installed.
To obtain this hotfix, fill out the hotfix request form at http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=943545&kbln=en−us STORPort Miniport Driver
38. BIOS 1.48
39. Dual port PCI−X fibre channel mezzanine card option is embedded. No PCI/PCI−X slots available.
40. Firmware Version 1.91a5
41. BIOS 1.71a0
42. Single node support only with Emulex 4Gb HBAs
43. Firmware Version 2.72a2
44. BIOS 3.03a9
45. FSC Fibre Channel module. Dual channel 4GBit/s HBA for BX6xx−series blade servers only.
46. Booting from the SAN with PowerPath is supported. Refer to the Path Management Software section for supported versions of PowerPath.
47. FSC Fibre Channel module. Dual channel 2GBit/s HBA for BX6xx−series blade servers only.
48. BIOS 1.52 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
49. Virtual machines running on VMWare ESX are supported booting from the array.
50. VMWare ESX Server itself is supported booting from external array.
51. BIOS 1.24 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
52. The Linux Host Connectivity Guide, p/n 300−003−865, can be found on EMC Powerlink (http://powerlink.emc.com).
53. BIOS 1.23
54. BIOS 1.05
55. Firmware Version 2.70a5 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
56. BIOS 1.70a3
57. FCode Value 2.72a2
58. BIOS 3.02a6
59. EMC VolumeLogix Software required for multiple BladeServers when direct−attached to EMC Symmetrix storage.
60. Internal port(s) on QLogic or McData 4Gb FC switch module(s) must be set to 4Gb to SAN boot.
61. Internal port(s) on Qlogic or McData 4Gb FC switch module(s) must be set to 4Gb (if 4Gb operation is required or to 2Gb if 2Gb operation is required)
62. Requires IBM Multi−Switch Interconnect Module for IBM BladeCenter (39Y9314) installed in IBM BladeCenter H and with appropriate fibre channel switch modules to installed in bays
8 & 10.
63. Driver Version 9.1.7.16
64. This HBA is equivalent to the QLogic QLA2310.
65. This HBA is equivalent to the QLogic QLA2340.
66. Firmware Version 2.70a5
67. BIOS 2.02a2
68. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LPe1150−E.
69. QLogic SANSurfer/SANBlade Manager is not supported. Use QLogic SANCLI utility.
70. PCI−X slots in this server only support low−profile hbas with low−profile brackets. Please ensure your HBA vendor has included the proper bracket to fit this server.
71. Supports Boot BIOS 1.70a3. Available at http://www.emulex.com
72. NEC SigmaBlade servers are not supported with Windows 2003 SP1 (x86 and x64 versions.)
73. Boot BIOS 1.70a3 supported for external boot. Available at http://www.emulex.com
74. EMC supported drivers, firmware, and boot BIOS can be downloaded from http://www.emulex.com in the EMC section, by obtaining the supported driver for the Emulex LP1050−E.
75. BIOS 2.04
76. Driver Version 9.1.4.17L STORPort Miniport Driver
77. BIOS 3.03a3
78. BX6xx−series systems use an embedded fibre channel controller. Contact Fujitsu Siemens to acquire the proper BIOS for the embedded fibre channel controller.
79. Firmware Version 1.92a1 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
80. BIOS 2.01a2 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
81. Requires BIOS 1.47 available in the EMC−approved section of the QLogic website at http://www.qlogic.com
82. BIOS 1.52
83. Flex Address support requires BIOS v3.03a3
84. Flex Address support requires BIOS v2.04
85. Boot from SAN with Linux native multipathing software (DM−MPIO) is not supported.
86. PowerPath is not supported.
87. PCI−Express slots 5,6,and 7 are disabled when system has 2 CPUs (2−socket).
88. Driver Version 9.1.4.15 STORPort Miniport Driver
89. BIOS 1.06
90. This dual port HBA is only supported on DELL PE 6850 in the right−most slot (seen from the rear of the server chassis) marked "FC"
91. Mixing 2Gb and 4Gb fibre channel expansion cards is not supported in this server.
92. Driver Version 9.1.7.45 STORPort Miniport Driver
93. During the installation of Windows Server 2008 on a PowerEdge R900 server, a system Blue Screen error message (STOP 124) may be displayed if there is a fibre channel adapter
installed in Slot 5. To avoid the problem, either use a different slot, or remove the adapter from slot 5 before prior to installing Windows Server 2008. The adapter can be inserted back
into Slot 5 after the operating system is installed.
This notice will be updated once the Microsoft hotfix is released.
94. Driver Version 2.40a3 As of 2.40a2 Microsoft will no longer allow the Emulex Port Driver to be used in any HCT LOGO solution or block submissions. The Port driver is still digitally
signed, but STORPort drivers will be required for all new HCT LOGO solution and block submissions. SCSI FC Port driver. EMC recommends using STORPort drivers where
available. END OF LIFE NOTICE: SCSI miniport and SCSI full port drivers are frozen and EOL at this time for Windows 2003 operating systems. EMC recommends migrating to the
currently supported STORPort driver for your HBA. EMC will continue to support existing customers who have Windows 2003 SCSI drivers installed, but any fixes or HCL support will
require an upgrade to STORPort. Refer to SalesAdvantage articles for the benefits of using STORPort drivers and information on migrating from SCSI to STOR under Windows 2003.
SCSI drivers listed in the April 2006 ESM will be the last supported SCSI drivers for Windows 2003.
Novell Netware
Novell Netware
No. Host System
Operating
System
Host
Bus Host Bus Adapter Topology
Storage
Array
External
Boot
1 Dell PowerEdge: 1800, 1850, 2800, 2850;
HPQ Proliant: DL380 (G4), DL580 (G3)
18
, ML370 (G4)
18
;
Hewlett Packard Proliant DL360: (G4), (G4p);
IBM xSeries x336 (8837)
19
Novell Netware
6.5 SP3
1, 23
PCI
Express
QLogic
QLE2360−E−SP
2, 16,
24, 25
FC−AL,
FC−SW
EMC
CLARiiON
AX150
3, 4,
5, 6, 7, 8, 9,
10, 11, 12,
13, 14, 15
Y
CLARiiON AX150
03/04/2009 278 CLARiiON AX150