Filter
Top Products
SuSE SLES [IA64]
SuSE SLES [IA64]
No. Host System Operating System Host Bus Host Bus Adapter Topology Storage Array
External
Boot
1 SGI Altix: 450
17
, 4700
15,
16
SuSE SLES [IA64] 10 SP1
11, 12,
13, 14
PCI Express,
PCI−X
Emulex LPe11000−E
1, 2, 3, 4,
5, 6
FC−AL,
FC−SW
EMC CLARiiON
AX150
Y
8, 9, 10
2 SGI Altix: 450
17
, 4700
15,
16
SuSE SLES [IA64] 10 SP1
11, 12,
13, 14
PCI Express,
PCI−X
Emulex LPe11002−E
1, 2, 3, 4,
5, 6
FC−AL,
FC−SW
EMC CLARiiON
AX150
Y
7, 8, 9, 10
3 SGI Altix: 450
17
, 4700
15,
16
SuSE SLES [IA64] 10 SP2
12, 13,
14, 19
PCI Express,
PCI−X
Emulex LPe11000−E
1, 2, 5, 6,
18
FC−AL,
FC−SW
EMC CLARiiON
AX150
Y
8, 9, 10
4 SGI Altix: 450
17
, 4700
15,
16
SuSE SLES [IA64] 10 SP2
12, 13,
14, 19
PCI Express,
PCI−X
Emulex LPe11002−E
1, 2, 5, 6,
18
FC−AL,
FC−SW
EMC CLARiiON
AX150
Y
7, 8, 9, 10
1. Firmware Version 2.80a4 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
2. BIOS 2.02a1 Available in the EMC−approved section of the Emulex website. http://www.emulex.com
3. Driver Version 8.1.10.12−update This in kernel driver is only available on errata kernels equal to or greater than 2.6.16.54−0.2.3. Driver is integrated into the kernel.
4. Driver Version 8.1.10.3 Driver is integrated into the kernel.
5. BIOS 4.00a1 Available in the EMC−approved section of the Emulex website. http://www.emulex.com EFI Boot code. Boot support for 64−Bit servers can be accomplished in two
ways depending on your server. If your server does not have support for Legacy Option ROMs that use INT 13 for external boot, then an EFI boot driver must be used instead. Refer
to your server documentation as to whether your server supports Legacy Option ROM loading.
6. SNIA HBA API Supported.
7. Booting from the SAN with PowerPath is supported. Refer to the Path Management Software section for supported versions of PowerPath.
8. Virtual machines running on VMWare ESX are supported booting from the array.
9. VMWare ESX Server itself is supported booting from external array.
10. PowerPath is not supported.
11. Supported kernels: 2.6.16.46−0.12, 2.6.16.46−0.14, 2.6.16.53−0.8, 2.6.16.53−0.16, 2.6.16.54−0.2.3, 2.6.16.54−0.2.5, 2.6.16.54−0.2.8. Confirm kernel support with server vendor.
12. SGI's XFS filesystem is also supported for this configuration. Files that are part of the released distribution of the operating system (e.g. /, /etc, /usr, /opt, etc) must not reside on an
XFS filesystem. XFS is supported on non−operating system data only.
13. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
14. EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an RPQ.
15. Limited to 64 sockets maximum. Larger configurations require RPQs and confirmation of support from SGI.
16. Compute Blades:
Density Configuration −
Two processor sockets per blade
− Up to 78* Intel® Itanium® Processor sockets per rack
− Dual Core Intel® Itanium® Series 9000 1.67GHz, 8, 18 or 24MB/667MHz FSB
− 8 DIMM slots per blade: 1GB, 2GB or 4GB DIMMs
Bandwidth Confi guration −
One processor socket per blade
− Up to 39* Intel® Itanium® Processor sockets per rack
− Dual−Core Intel® Itanium® Series 9000 1.67GHz, 8, 18 or 24MB/667MHz FSB
− 8 DIMM slots per blade: 1GB, 2GB or 4GB DIMMs
Memory−only Blade:
− Adds to shared memory without cost of cpu and associated software licenses
− 12 DIMM slots per blade: 1GB, 2GB or 4GB DIMMs
I/O Blades
Base I/O Blade:
− Minimum of One Base I/O blade required for every Linux instance/partition
− Up to two hard drives − 300GB SAS
− Two low profi le PCI−X slots
− Supports 2D graphics card (details below)
− Supports HW RAID 0,1
− One 4X SAS port, one DVD R/W, two Gigabit Ethernet, and four USB connectors
− Double blade width − for use in blade slot 1 only
PCI−X Expansion Blade − 3 slot
− Three full 64−bit/133 MHz 3.3V PCI−X slot, hot plug capable
− Double blade width, for use in blade slots 1 only
PCI−X Expansion Blade − 2 slot
− Two full 64−bit/133 MHz 3.3V PCI−X slot hot−plug capable
− Single blade width
PCI−Express I/O Blade − 2 slot
− Two full PCI−Express slots
− Supports 2 standard height PCIe cards at 16X speeds.
− Supports 3D graphics card options (details below)
− Single blade width
PCI−X + PCI−Express I/O Blade − 4 slot
− Two 64−bit/133 MHz 3.3V PCI−X slots
− Two full 16x PCI−Express Slots
− Double blade width − for use in blade slot 1 only
17. Compute Blades:
Two processor sockets per blade
Dual−Core Intel® Itanium® Series 9000 1.67GHz, 8, 18 or 24MB/667MHz FSB
8 DIMM slots per blade: 1GB, 2GB or 4GB DIMMs (NUMA architecture)
Up to 38 sockets per short rack
Up to two 38 socket single system image machines per tall rack
I/O Blades:
Base I/O Blade
Minimum of One Base I/O blade required for every SSI/partition
Two low profile PCI−X slots PCI−X Expansion Blade − 3 slot
Three full 64−bit/133 MHz 3.3V PCI−X slot, hot plug capable
Double blade width, for use in blade slots 1 only PCI−X Expansion Blade − 2 slot
Two full 64−bit/133 MHz 3.3V PCI−X slot (100MHz if both slots populated), hot plug capable
Single blade width PCI−Express I/O Blade − 2 slot
Two full PCI−Express slots
Supports 2 standard height PCIe cards at 16X speeds.
Single blade width PCI−X + PCI−Express I/O Blade − 4 slot
Two 64−bit/133 MHz 3.3V PCI−X slots
Two full 16x PCI−Express Slots
Double blade width − for use in blade slot 1 only
18. Driver Version 8.2.0.22 Driver is integrated into the kernel.
19. Supported kernels: 2.6.16.60−0.21, 2.6.16.60−0.23, 2.6.16.60−0.27, 2.6.16.60−0.30, 2.6.16.60−0.31, 2.6.16.60−0.33, 2.6.16.60−0.34, 2.6.16.60−0.35. Confirm kernel support with
server vendor.
SuSE SLES [IBM Power]
CLARiiON AX150
03/04/2009 782 CLARiiON AX150