Filter
Top Products
SUPERMICRO
No. Host System Minimum Host Bios
1 SUPERMICRO Super P3TDL3
1
, SUPERMICRO Super S2DL3
1
AMI BIOS 07.00.xx
1. 64−bit slots for 3.3v HBAs only.
Samsung
Samsung
No. Host System Minimum Host Bios
1 Samsung ES470, Samsung ES570 BIOS 3.06, EFI 1.10 [14.60], Firmware R05.21
2 Samsung ZSS150 SE7520JR23.86B.B18.03.00.0, SE7520JR23.86B.B18.03.00.0054
3 Samsung ZSS230−D, Samsung ZSS230−T SHW40.86B.D.04.00.0668
Stratus
Stratus
No. Host System Minimum Host Bios
1 Stratus ftServer 2300
6
2.0
2 Stratus ftServer 2400
7
1.0.77
3 Stratus ftServer 3210
1, 2, 3, 4, 5
, Stratus ftServer 3220
1, 2, 3, 4, 5
6.0.4107, 6.0.5109
4 Stratus ftServer 4300
7
, Stratus ftServer 4600
7
1.0
5 Stratus ftServer 5200
1, 3, 8, 9, 10
6.0.0, 7.0.0
1. Systems running Stratus OS 1.2.2.X or 1.3 require MS hotfix Q327477 and VxVM 2.7 Hotfix 5A. Stratus OS 1.3.1 and above incorporates these hotfixes.
2. ftServer OS 1.4.x requires PowerPath 3.0.2.
3. Bus Enumeration Issue Causes Problems using SYMCLI SCSI bus enumeration of disks will change depending on cold boot or warm boot. This causes symcli commands to fail
because the path is changed and SYMCLI can no longer communicate with the Symmetrix.
By "shutdown" and booting system, internal disks are assigned first, followed by Symmetrix disks.
By "restart" the system, Symmetrix disks are assigned first, followed by internal disks. Drive letter are not changed in both cases.
The workaround is to perform "symcfg discover" after rebooting.
4. Requires Stratus ftServer OS 1.4.x or greater.
5. Supports Stratus OS 1.2.2.X through 2.1.X.
6. Requires Stratus OS 3.1
7. Supports Stratus OS 4.1 FTSSS Release
8. Supports Stratus OS 1.2.2.X through 1.4.X.
9. Requires PowerPath 3.0.2.
10. Requires Stratus ftServer OS 1.4.x.
Sun
Sun
No. Host System Minimum Host Bios
1 Sun Netra T2000
1
S10 Update 1 (01/06)
2 Sun Sun Blade Server Module X6240, Sun Sun Blade Server Module X6440, Sun Sun Blade Server Module X6450 Refer to Sun support website
3 Sun Sun Fire V20z, Sun Sun Fire V40z 1.26.08 (April 2004)
1. Must add "set sd:sd_io_time=60", "set sd:sd_max_throttle=20", "set ssd:ssd_io_time=60", and "set ssd:ssd_max_throttle=20" in the /etc/system file for Symmetrix or CLARiiON
attach. Do not include quotes on these entries.
Unisys
Unisys
No. Host System Minimum Host Bios
1 Unisys CS7201
1
1.0
2 Unisys DR/2, Unisys ES2023
2
, Unisys ES2025 6.00.36
3 Unisys DS/2 6.00.5
4 Unisys ES2024 9
5 Unisys ES2026 A02
6 Unisys ES2026L A03
7 Unisys ES2043
2
15.6 −009
8 Unisys ES2045
2
, Unisys ES5045, Unisys QS/2
2
15.7 −008
9 Unisys ES2046, Unisys ES2046L, Unisys ES3105, Unisys ES3140, Unisys ES3140L A05
10 Unisys ES2085, Unisys ES5085 22.7 Unisys 22.6 ICL_006 ICL
11 Unisys ES3020 A08
12 Unisys ES3020L A15
13 Unisys ES3040, Unisys ES3040L A09
14 Unisys ES3120, Unisys ES3120L, Unisys ES3140, Unisys ES3140L A00
15 Unisys ES3220, Unisys ES3220L 1.1.0, 1.3.6
16 Unisys ES3240L 1.1.4
Host BIOS
03/04/2009 955 Host BIOS