Filter
Top Products
SAFETY SUMMARY
S - 5
ETC00303(1) BINOS E e (2.0) 11/00
Rosemount Analytical
4. BINOS E specific notes for the user
Before startup unscrew transfer safety lock (knurled-head screws)
of the BINOS E (Item 5. of operation manual) !
The installation site for the instrument has to be dry and remain above freezing
point at all times.
The instrument must be exposed neither to direct sunlight nor to strong sources
of heat. Be sure to observe the permissible ambient temperature !
For outdoor sites, we recommend to install the instrument in a protective cabinet.
At least, the instrument has to be protected against rain (e.g., shelter).
Free flow of air into and out of the BINOS E (ventilation slits) must not be
hindered by nearby objects or walls !
Do not interchange gas inlets and gas outlets !
All gases have to be supplied to the BINOS E as conditioned gases !
When the instrument is used with corrosive gases, it is to be verified that there
are no gas components which may damage the gas path components.
The exhaust gas lines have to be mounted in a declining, descending,
pressureless and frost-free and according to the valid emission legislation !
In case it is necessary to open the gas paths, close the analyzers
gas connections with PVC caps immediatly !
Pressure of sample gas / test gases max. 1,500 hPa !
By using of optional delivering terminal strip adapters with BINOS E the
analyzer is not be in agreement with the CE conformity. In this case CE
conformity has to be declared by customer as “manufacturer of system”.
Use only optional delivered cables from our factory or equivalent shielded
cables to be in agreement with CE conformity.
The customer has to prove that the shield is connected on both sides.
Shield and connectors housing has to be connected conductive.
BINOS E SPECIFIC NOTES FOR THE USER
Sub.-min.-D-plugs/sockets have to be screwed to the analyzer.