Filter
Top Products
FRONT PANEL PROGRAM
8 - 1
ETC00303(1) BINOS E e (2.0) 11/00
Rosemount Analytical
REQUIREMENTS
8. BINOS E Front Panel Program
The description of the BINOS E Front Panel Program includes the following information:
1. Requirements
2. Installation and Startup
3. Function Keys
4. Status Display
5. Display Page
6. Recorder Page
7. Messages Page
8. Analog Output Link and Adjustment Page
8.1 Requirements
Listed below are the minimum recommended hardware and software requirements for in-
stalling the BINOS E front panel program in a Microsoft Windows 95, 98 or NT operating
system:
· Pentium processor with 233 MHz or better
· 32 MB RAM (higher RAM improves performance)
· Sufficient available hard disk space. The required available space depends on the
data acquisition rate (see chapter 5) (Calculate approx. 63 MB per day if the fastest
data acquisition is running without data compression).
· 8 MB graphic board
· Serial interface (RS 232 COM port)
The following devices are recommended to connect the BINOS E with your PC:
· Zero modem cable (part number: ETC00257)
· Gender changer (part number: ETC00258)
These accessories can be provided by Fisher-Rosemount with the BINOS E analyzer as
options.