Filter
Top Products
INSTALLATION AND PREPARATION OF STARTUP
5 - 5
ETC00303(1) BINOS E e (2.0) 11/00
Rosemount Analytical
5.3.1 Standard
Depending on BINOS E version the following gas connections are installed:
in = Gas inlet out = Gas outlet
Channel 1 = measuring channel 1 Channel 2 = measuring channel 2
Channel 3 = measuring channel 3 reference = Reference gas (Differential measurement)
purge = purge gas (housing)
Zero gas and span gas are introduced directly via the sample gas inlet. The test gas containers
have to be set up according to the current legislation.
Be sure to observe the safety regulations for the respective gases
(sample gas and test gases / span gases) and the gas bottles !
GAS CONNECTIONS
Fig. 5-3: BINOS E, standard gas connections